Yes, I am a PIRATE...200 years too late...

Wednesday, January 12, 2011

Crafty McCrafterson....Strikes Again!


The craft monster strikes again.  If anything refreshing came from the "snow days" it's my time to actually do some crafting!  I have wanted to do this project for sometime after seeing something similar in a magazine.  I wanted to make a valance for my guest bedroom (AKA Cold Storage) that had some pizazz.  I decided on this IKEA fabric.  I had already used the white background version as a wall hanging in my "getting ready room"  apparently if you don't have kids and you have three bedrooms....you can have a "getting ready room"...so be jealous.  So here are the steps of my make it up as I go valance.  

First, I ironed the fabric and laid it out on my living room floor to cut.  


I cut around the edge of the pattern, leaving about 1/2 inch extra to fold under later. 



I snipped at the point of each curve to allow ease in folding later. 



This is the finished clipped and snipped product. 



I finger pressed the edges under until the white edge was all that showed.  



Then I for real pressed the edge down.  Some of the black did show....but I'm not perfect...surprise, I know....and did I mention I'm making most of this up as I go along?  The "inspiration" piece was completely geometric-with straight lines!



Now onto the sewing!  Here is my new machine Santa brought me!  I love it!  



I sewed the folded "hem" down.  



Turned and stitched edges.


Next, I folded the top edge down and pressed.  This is where I really went off on making up my own plan...



I got these clippy things at IKEA.  



Clippy Thing Close-up!



The window in question.  Now the problem lies in that I already have these sheers up.  IKEA does offer a "double" curtain rod situation...I only need to buy another rod and new brackets...but until I can get back down there I had to improvise...slightly.



Sooooooooooooo I took the sheers down and put one panel on top of the other one.  I clipped the clips on to hold them in place. 



I positioned the new valance over the sheers, centering it and overlapping the pressed top edge to envelop the two layers of sheers. 



Then I replaced the clips. 



I still have some work to do readjusting the sheers, but I think it turned out pretty well!



:)

Tuesday, January 11, 2011

Crafty McCrafterson.....Snow Day Happenings

A lot of people have told me I should have a craft blog.  Since I have enough trouble keeping up one blog....I'll post one of my crafts and see what happens.  So here goes....the first post of Crafty McCrafterson.  




I have been wanting to add some stuff to my kitchen, but I've been at a standstill for both time and ideas.  I have been on the fence with some of the signs that you can get at Hobby Lobby and places of the such...the ones that say "Eat" or "Family" or "Kitchen".  I just felt like they were a little overdone....but I still wanted....something.  I had found two possibilities on Copycat Crafts, one of my new favorite craft blogs, but I was still holding out.  The EAT sign was a front runner as was Eat and Be Merry sign.  I finally decided on something fitting for the kitchen...but a lot more personal and meaningful for me.  Since I live in my grandparents' house, I thought of something my Papaw used to say before every meal..."You got to eat to live".  It's true, it goes well in a kitchen, and it reminds me of my Papaw!  WINNER!  So here is how I did it.  First I gathered my crafty things.  I had just bought some scrapbook stuff from Mighty Dollar in Thomasville.  If you are crafty and you haven't been here...you are missing out.  They carry a load of scrapbook stuff all the same brands that you would pay $$$ for at Michael's or Hobby Lobby and it's all $1!  This also made a great excuse to bust out the frames I bought at Wal-Mart on Black Friday.  


Here are some of the supplies:
 Letters and Background Papers via the Mighty Dollar

 Coke Zero always a crafting essential (also note my chipping nail polish...so classy)

Black Friday Frames...I got all of these for like $7!

Now on to the actual craft.....

First I found my letters and positioned them on the counter.  Since there were several variations of each letter, I tried a few combinations before I had my words together. 


As you can see above, each letter had jagged edges....now it would have been super cool if they were like this all the way around..but they weren't so in comes the paper cutter.   I trimmed all of the edges down.


Next, I glued the pieces in place with a glue stick. 


Using the frame as a guide, I checked to see if my letters were centered, since I used the glue stick, I could easily slide letters around on the paper to readjust. 



 I used a small piece of tape to hold the paper to the glass. 



Since I'm hanging these on the wall, I don't need the easel attachment.  I plan on these staying on the wall for quite some time and they get in the way, so I just ripped them off.  :)



Everybody needs a brown dog :)


 Final products!



It took a little placement and trial and error, but here is the final product on the wall!  I used my level and measuring tape thank you very much! 




Yay! :)