Yes, I am a PIRATE...200 years too late...

Wednesday, January 12, 2011

Crafty McCrafterson....Strikes Again!


The craft monster strikes again.  If anything refreshing came from the "snow days" it's my time to actually do some crafting!  I have wanted to do this project for sometime after seeing something similar in a magazine.  I wanted to make a valance for my guest bedroom (AKA Cold Storage) that had some pizazz.  I decided on this IKEA fabric.  I had already used the white background version as a wall hanging in my "getting ready room"  apparently if you don't have kids and you have three bedrooms....you can have a "getting ready room"...so be jealous.  So here are the steps of my make it up as I go valance.  

First, I ironed the fabric and laid it out on my living room floor to cut.  


I cut around the edge of the pattern, leaving about 1/2 inch extra to fold under later. 



I snipped at the point of each curve to allow ease in folding later. 



This is the finished clipped and snipped product. 



I finger pressed the edges under until the white edge was all that showed.  



Then I for real pressed the edge down.  Some of the black did show....but I'm not perfect...surprise, I know....and did I mention I'm making most of this up as I go along?  The "inspiration" piece was completely geometric-with straight lines!



Now onto the sewing!  Here is my new machine Santa brought me!  I love it!  



I sewed the folded "hem" down.  



Turned and stitched edges.


Next, I folded the top edge down and pressed.  This is where I really went off on making up my own plan...



I got these clippy things at IKEA.  



Clippy Thing Close-up!



The window in question.  Now the problem lies in that I already have these sheers up.  IKEA does offer a "double" curtain rod situation...I only need to buy another rod and new brackets...but until I can get back down there I had to improvise...slightly.



Sooooooooooooo I took the sheers down and put one panel on top of the other one.  I clipped the clips on to hold them in place. 



I positioned the new valance over the sheers, centering it and overlapping the pressed top edge to envelop the two layers of sheers. 



Then I replaced the clips. 



I still have some work to do readjusting the sheers, but I think it turned out pretty well!



:)

No comments:

Post a Comment